Fire Pro Blog

April 21, 2023
BDA (Bi-Directional Amplifier) systems

BDA (Bi-Directional Amplifier) systems are an important component of emergency communication systems, providing reliable radio coverage for emergency responders inside buildings. NFPA 72, the National Fire Alarm and Signaling Code, provides comprehensive guidance on the installation, testing, and maintenance of BDA systems.

According to NFPA 72, BDA systems are required in buildings where the radio signal strength for emergency responders is insufficient. This can be due to a variety of factors, including the building's size, construction materials, or location. BDA systems amplify the radio signal to ensure that emergency responders can communicate effectively inside the building.

NFPA 72 provides specific guidance on the design, installation, testing, and maintenance of BDA systems. For example, Section 24.5 of NFPA 72 defines what a BDA system is and provides guidance on the system's design and installation. Section 24.6 outlines the requirements for the testing and maintenance of BDA systems, including specific testing procedures and frequencies.

In addition, NFPA 72 requires that personnel involved in the installation, testing, and maintenance of BDA systems receive appropriate training, as specified in Section 24.8. The code also specifies requirements for the inspection and testing of BDA systems after installation or modification, as outlined in Section 24.9.

Overall, BDA systems are critical for ensuring reliable radio coverage for emergency responders inside buildings. By following the guidance provided in NFPA 72, building owners and operators can ensure that their BDA systems are properly designed, installed, and maintained to meet the needs of emergency responders.



Fire Alarm Voltage Drop Basics

Fire alarm voltage drop calculations are necessary to ensure that the electrical wiring and equipment for fire alarm systems function properly during an emergency. Voltage drop is a phenomenon that occurs when electrical current flows through a wire, causing the voltage to decrease as it travels through the wire. This drop in voltage can cause problems in the functioning of the fire alarm system, such as reduced sound levels or improper activation of alarms. This report will discuss fire alarm voltage drop calculations and how to perform them.


What is Voltage Drop?

Voltage drop is the reduction in voltage that occurs as electrical current flows through a wire. This drop in voltage is caused by the resistance of the wire and is proportional to the current flowing through the wire. The longer the wire, the greater the resistance, and the greater the voltage drop. This can result in insufficient voltage reaching the fire alarm devices, which can cause them to malfunction.


Why are Voltage Drop Calculations Necessary for Fire Alarm Systems?

Voltage drop calculations are necessary to ensure that the fire alarm system functions properly during an emergency. If the voltage drop is too high, the fire alarm devices may not function as intended, resulting in delayed response or failure to activate. This can have serious consequences, including loss of life and property damage.


How to Perform Fire Alarm Voltage Drop Calculations?

To perform fire alarm voltage drop calculations, the following steps should be taken:


Step 1: Determine the wire size and type.

The wire size and type should be determined based on the electrical load and the length of the wire run. The National Electrical Code (NEC) provides guidelines for determining the wire size and type based on the electrical load and the length of the wire run.


Step 2: Determine the electrical load.

The electrical load is the total amount of current required by the fire alarm devices connected to the wire. This can be determined by adding up the current requirements of each device.


Step 3: Determine the length of the wire run.

The length of the wire run is the distance between the fire alarm control panel and the last device on the circuit. This distance should be measured in feet.


Step 4: Calculate the voltage drop.

The voltage drop can be calculated using the following formula:

Voltage drop = (2 x electrical load x wire length x wire resistance) / wire gauge constant

The wire gauge constant is a value that varies based on the wire size and type. It can be found in the NEC or in other reference materials.


Step 5: Compare the voltage drop to the allowable limit.

The allowable voltage drop for fire alarm circuits is typically 10% or less. If the calculated voltage drop exceeds the allowable limit, the wire size should be increased or the wire run should be divided into multiple shorter runs.


Conclusion:

Fire alarm voltage drop calculations are critical to ensuring that fire alarm systems function properly during an emergency. By following the steps outlined in this report, fire alarm designers and installers can calculate the voltage drop for their systems and take appropriate measures to ensure that their systems operate reliably and effectively.



February 20, 2023

Elevator Recall Essentials

Elevator recall is an essential component of fire protection in buildings with elevators. The purpose of elevator recall is to move elevators to a safe location and prevent their use in the event of a fire. The National Fire Protection Association (NFPA) 72 and the International Building Code (IBC) provide guidelines for the design and installation of elevator recall systems as part of fire alarm systems.

NFPA 72 is a standard for the installation, testing, and maintenance of fire alarm systems, and it provides specific requirements for the design and installation of elevator recall systems. According to NFPA 72, elevator recall must be provided in accordance with the requirements of the local authority having jurisdiction (AHJ) and must comply with the elevator safety code in effect at the time of installation. The standard specifies the location and number of smoke detectors required for elevator recall, as well as the timing and sequence of recall.

In addition to the requirements for smoke detection, NFPA 72 specifies the required signal transmission methods for elevator recall. For example, the signal from the smoke detector to the elevator control panel must be transmitted via a dedicated fire alarm system, or via a coded signal transmitted over normal power wiring.

The IBC is a model code that provides requirements for the design and construction of buildings, including fire protection systems. According to the IBC, elevator recall systems must be installed in all buildings equipped with elevators that have more than three stories or 25 feet of travel. The IBC specifies the minimum number and placement of smoke detectors required for elevator recall, as well as the timing and sequence of recall.

The IBC also specifies the required signal transmission methods for elevator recall. For example, the signal from the smoke detector to the elevator control panel must be transmitted via a dedicated fire alarm system, or via a coded signal transmitted over normal power wiring. The IBC also requires that the elevator recall system must be designed and installed in accordance with the elevator safety code in effect at the time of installation.

In addition to these guidelines, it's important to note that local codes and regulations may also apply and may include additional or more specific requirements related to elevator recall as part of fire alarm systems. Building owners and managers should work closely with their AHJ and a qualified fire protection professional to ensure that their elevator recall system is designed and installed in compliance with all applicable codes and regulations. A properly designed and installed elevator recall system can help to protect building occupants and prevent the spread of fire.


February 20, 2023
Sleeping Area Basics

Fire alarm systems are an essential component of building safety, and their design and installation are subject to strict codes and regulations. In particular, the National Fire Protection Association (NFPA) 72 and the International Fire Code (IFC) provide guidelines for the installation and use of fire alarm systems in sleeping areas.

  

NFPA 72 is a standard for the installation, testing, and maintenance of fire alarm systems, and it provides specific requirements for the design and installation of fire alarm systems in sleeping areas. According to NFPA 72, a fire alarm system in a sleeping area must be capable of awakening occupants in the event of a fire, and it must be installed in accordance with the requirements of the local authority having jurisdiction (AHJ).

  

The standard provides guidance on the placement and spacing of smoke detectors in sleeping areas, as well as requirements for the audibility and intelligibility of alarm signals. For example, NFPA 72 requires that the sound level of alarm signals in sleeping areas must be at least 15 decibels above the average ambient sound level or 5 decibels above the maximum sound level if the maximum level is at least 10 decibels above the average level.

  

The IFC is a model code that provides requirements for the design and installation of fire protection systems, including fire alarm systems. According to the IFC, a fire alarm system must be installed in all sleeping areas in buildings that are three or more stories in height or have more than 16 sleeping units.

  

The IFC provides specific requirements for the placement and spacing of smoke detectors in sleeping areas, as well as requirements for the audibility and intelligibility of alarm signals. For example, the IFC requires that the sound level of alarm signals in sleeping areas must be at least 15 decibels above the average ambient sound level, and it specifies the required minimum decibel levels for different types of sleeping areas.

  

In addition to these guidelines, it's important to note that local codes and regulations may also apply and may include additional or more specific requirements related to fire alarm systems in sleeping areas. Building owners and managers should work closely with their AHJ and a qualified fire protection professional to ensure that their fire alarm system is designed and installed in compliance with all applicable codes and regulations.

  


February 20, 2023
NEC (NFPA 70) in Relation to Fire Alarm Systems
The National Electrical Code (NEC) is a standard that provides requirements for the safe installation and use of electrical wiring and equipment in the United States. Fire alarm systems are an important component of building safety, and the NEC includes specific requirements related to the installation and use of fire alarm systems. Some of the sections of the NEC related to fire alarm systems are:

Article 100 - Definitions: This section of the NEC defines terms used throughout the code, including definitions for specific terms related to fire alarm systems, such as "alarm notification appliances," "fire alarm system," and "supervision."

Article 210 - Branch Circuits: This section of the NEC provides requirements for the installation of branch circuits, which are the electrical circuits that supply power to fire alarm systems.

Article 300 - Wiring Methods: This section of the NEC provides requirements for the installation of wiring methods, including requirements for the installation of wiring used in fire alarm systems.

Article 517 - Health Care Facilities: This section of the NEC provides specific requirements for the installation of fire alarm systems in health care facilities.

Article 640 - Audio Signal Processing, Amplification, and Reproduction: This section of the NEC provides requirements for the installation of audio equipment used in fire alarm systems.

Article 760 - Fire Alarm Systems: This section of the NEC provides comprehensive requirements for the installation and use of fire alarm systems. It includes requirements for the installation of fire alarm components, wiring, and power supplies, as well as requirements for testing and maintenance of fire alarm systems.

These sections of the NEC are important to understand for anyone involved in the installation or maintenance of fire alarm systems. It's important to note that local codes and regulations may also apply and may include additional or more specific requirements related to fire alarm systems.


February 20, 2023
Public Mode and Private Mode
Private mode and public mode are two different methods of fire alarm notification that can be used in different situations depending on the specific needs and circumstances.

Public mode refers to a fire alarm system that is designed to alert everyone in a building or facility that a fire has been detected. This typically involves loud horns or sirens that are designed to be heard throughout the entire building or area, along with a flashing strobe light to visually alert individuals who may have hearing impairments. Public mode is generally used in situations where it is important to ensure that everyone is aware of a potential fire, such as in a large commercial or industrial setting where there are many people working or visiting.

Private mode, on the other hand, refers to a fire alarm system that is designed to alert only certain individuals or groups, such as designated fire wardens or security personnel, that a fire has been detected. This is typically done through the use of discreet alarm signals, such as a beeping or flashing light that is only visible to those who need to be notified. Private mode is often used in situations where it is important to prevent a panic or disruption in the building, such as in a hospital or nursing home where patients may be easily alarmed.

In summary, public mode is used when it's important to alert everyone in a building or area, while private mode is used when it's important to only alert specific individuals or groups. The selection of which mode to use will depend on the specific needs of the building or facility and the emergency response plan in place.


February 19, 2023
How To Estimate Fire Alarm Systems
If you are a fire protection contractor or engineer, estimating fire alarm systems is an essential skill for securing projects and ensuring accurate pricing. In this blog, we will discuss some of the key steps to follow when estimating fire alarm systems.

Determine the type of fire alarm system
The first step in estimating a fire alarm system is to determine the type of system that will be installed. This can include conventional, addressable, or analog addressable systems, which differ in their complexity and cost. Knowing the type of system required is essential in determining the overall cost.

Determine the size and layout of the building
The size and layout of the building will affect the cost of the fire alarm system. A larger building with more zones and detection devices will require a more complex system and therefore cost more.

Identify the required equipment and components
Once you have determined the type of fire alarm system and the size and layout of the building, you can identify the required equipment and components. This includes the control panel, detectors, notification devices, wiring, and other components. Take accurate measurements of the space and consult with manufacturers to determine the most appropriate equipment and components for the project.

Determine the installation labor costs
The installation labor costs will vary depending on the complexity of the system and the size of the building. The cost may also be influenced by the availability of labor and the level of experience required for the installation.

Calculate other costs
Other costs to consider when estimating fire alarm systems include permits and inspections, testing and commissioning, and any required training or certification. Be sure to include these costs in your estimate to provide an accurate overall cost.

Present the estimate
Once you have completed your estimate, it is important to present it clearly and professionally to the client. Be sure to include a detailed breakdown of the costs and explain any assumptions or exclusions made in the estimate.

In conclusion, estimating fire alarm systems requires careful consideration of the type of system, the size and layout of the building, and the required equipment and components. It is important to consult with manufacturers, take accurate measurements, and consider all other costs associated with the project. By following these steps, you can ensure that your estimate is accurate and competitive, and that your clients are satisfied with the proposed fire alarm system.


February 19, 2023
Fire Alarm Installation in High-Rise Buildings
High-rise buildings present unique challenges when it comes to fire safety. The installation of a fire alarm system is a critical component in ensuring the safety of occupants and the protection of property. In this blog, we will discuss some of the fire alarm installation requirements for high-rise buildings.

Fire alarm system design
The design of the fire alarm system for a high-rise building must be specific to the building's size, layout, and occupancy. This includes the zoning and detection of the building, as well as the notification appliances required for each zone.

Zoning and detection
High-rise buildings must be divided into fire alarm zones with appropriate detection equipment in each zone. This is typically achieved by installing smoke detectors, heat detectors, and other types of sensors that can detect smoke, heat, or flames. Zoning and detection are critical in high-rise buildings to detect fires quickly and accurately, and to provide emergency responders with the necessary information to address the fire.

Notification appliances
Notification appliances, such as horns, strobes, or speakers, are required to alert occupants to the presence of a fire and provide clear and concise instructions on evacuation procedures. In high-rise buildings, these appliances must be placed in strategic locations to ensure that all occupants are aware of the danger and know what to do.

Power supply
The fire alarm system must have a reliable power supply, such as a backup generator, to ensure that the system remains operational during power outages. Backup power is crucial in high-rise buildings, where evacuating occupants can be a time-consuming process.

Monitoring
The fire alarm system must be monitored by a central station or by on-site personnel to ensure that alarms are promptly and appropriately responded to. In high-rise buildings, this can involve coordinating with local fire departments and emergency responders to ensure the safety of all occupants.

Testing and maintenance
Regular testing and maintenance are required to ensure that the fire alarm system is functioning properly. This includes testing the system's ability to detect and respond to fires, as well as conducting regular inspections and maintenance of system components.

In conclusion, high-rise buildings have specific fire alarm installation requirements to ensure the safety of occupants and property. It is important to work with qualified fire protection professionals to design and install the fire alarm system, and to conduct regular testing and maintenance to ensure the system remains in proper working order. With a properly installed and maintained fire alarm system, high-rise building occupants can feel confident that they are protected in the event of a fire.


February 19, 2023
Kitchen Hood Suppression System Installation
If you own or operate a commercial kitchen, installing a kitchen hood suppression system is an important step to protect your employees, customers, and property in the event of a fire. A kitchen hood suppression system works by automatically releasing a fire suppression agent, such as wet chemical or dry chemical, to extinguish fires that may occur in the cooking area.

In this blog, we'll walk you through the process of installing a kitchen hood suppression system in your commercial kitchen.

Step 1: Determine the type of suppression system required
The first step in installing a kitchen hood suppression system is to determine the appropriate type of system for your kitchen. There are several types of suppression systems available, including wet chemical, dry chemical, and pre-engineered systems. Consult with a qualified fire protection professional to determine the best type of system for your kitchen.

Step 2: Obtain necessary permits and approvals
Before beginning the installation, you will need to obtain any necessary permits and approvals from local authorities and fire departments. This may include submitting plans and specifications for review and approval.

Step 3: Prepare the installation area
Clear the installation area of any obstacles or debris and ensure that the kitchen hood and ductwork are clean and free of grease buildup. This will help ensure that the suppression system functions properly.

Step 4: Mount the suppression system components
Follow the manufacturer's instructions to mount the system components, including the control panel, nozzle distribution piping, and agent storage container. Be sure to mount the components securely and according to the manufacturer's recommended specifications.

Step 5: Install the detection and activation devices
Install the detection and activation devices, such as heat sensors and fusible links, according to the manufacturer's instructions. These devices will activate the suppression system in the event of a fire.

Step 6: Connect the electrical wiring
Connect the electrical wiring to the control panel and other system components, following local electrical codes and regulations. Be sure to test the electrical connections to ensure they are properly grounded and functioning correctly.

Step 7: Test the system
Once the system is installed, test it to ensure that all components are working properly. This may involve conducting a full-scale live fire test or a simulated test. Test the system regularly to ensure it remains in proper working order.

Step 8: Obtain final approval
After successful testing, obtain final approval from the relevant authorities and agencies. This will ensure that the suppression system is in compliance with all applicable codes and regulations.

In conclusion, installing a kitchen hood suppression system is a crucial step in protecting your commercial kitchen from fire damage. Be sure to follow all manufacturer's instructions and local codes and regulations when installing the system. Additionally, consider hiring a qualified fire protection professional to ensure that the system is installed and maintained correctly. With a properly installed and maintained suppression system, you can feel confident that your kitchen is protected in the event of a fire.


February 19, 2023
NICET IV Fire Alarm Certification
The National Institute for Certification in Engineering Technologies (NICET) offers a range of certifications for professionals in the fire protection and life safety industries. The highest level of certification offered by NICET is the NICET IV Fire Alarm certification. In this blog post, we will discuss the requirements for obtaining NICET IV Fire Alarm certification and the benefits it provides.

Requirements for NICET IV Fire Alarm Certification:

To obtain NICET IV Fire Alarm certification, candidates must meet the following requirements:

Education: Candidates must have a bachelor's degree in engineering or a related field or an associate's degree in engineering or a related field with at least five years of professional experience in the fire protection and life safety industry.

Professional Experience: Candidates must have a minimum of eight years of professional experience in the fire protection and life safety industry, including at least three years of experience in the design or project management of fire alarm systems.

Exams: Candidates must pass three NICET exams: Fire Alarm Systems Level III, Fire Alarm Systems Level IV, and Project Management Level IV.

Benefits of NICET IV Fire Alarm Certification:

Industry Recognition: NICET IV Fire Alarm certification is widely recognized as the gold standard in the fire protection and life safety industry. It demonstrates a high level of knowledge and expertise in the design and project management of fire alarm systems.

Career Advancement: NICET IV Fire Alarm certification can lead to career advancement opportunities, including higher salaries and management positions.

Continuing Education: NICET requires certification holders to complete continuing education units (CEUs) to maintain their certification. This ensures that certification holders stay up to date with the latest developments in the fire protection and life safety industry.

Professional Network: NICET certification holders have access to a network of professionals in the fire protection and life safety industry, including other certified individuals and industry experts.

In conclusion, obtaining NICET IV Fire Alarm certification requires a significant investment of time and effort, but it provides numerous benefits, including industry recognition, career advancement, continuing education, and access to a professional network. If you are a fire protection and life safety professional with a background in fire alarm systems design and project management, NICET IV Fire Alarm certification may be a valuable investment in your career.


February 19, 2023
VESDA - Very Early Smoke Detection Apparatus
VESDA, or Very Early Smoke Detection Apparatus, is a specialized air sampling smoke detection system used in a wide range of applications, including data centers, museums, warehouses, hospitals, and other facilities where early detection of smoke is essential. In this blog post, we will discuss the process of installing a VESDA system.

Conduct a Site Survey:
The first step in installing a VESDA system is to conduct a site survey to determine the best placement for the system. This involves identifying the areas of the facility where smoke is most likely to occur, as well as determining the airflow patterns and other environmental factors that may affect the system's performance.

Design the System:
Once the site survey is complete, the next step is to design the VESDA system. This involves selecting the appropriate type of VESDA detector for each area of the facility, as well as determining the appropriate number of detectors needed to ensure full coverage. The design should also include the placement of sampling pipes and other necessary components.

Install the System:
After the system has been designed, the next step is to install the VESDA system. This involves running the sampling pipes and connecting them to the VESDA detectors. The detectors should be placed in strategic locations throughout the facility, and the sampling pipes should be positioned to ensure optimal smoke detection.

Commission the System:
Once the VESDA system has been installed, it is important to commission the system to ensure that it is functioning properly. This involves testing the detectors and sampling pipes to make sure they are detecting smoke as intended. It is also important to test the alarm system to ensure that it is audible and visible from all areas of the facility.

Train Personnel:
Finally, it is important to train personnel on the proper use and maintenance of the VESDA system. This includes providing training on how to respond to a VESDA alarm, as well as how to perform routine maintenance on the system to ensure that it continues to function properly.

In conclusion, installing a VESDA system requires a thorough site survey, system design, installation, commissioning, and personnel training. By following these steps, you can ensure that your VESDA system is installed properly and will provide reliable smoke detection for your facility.


November 16, 2022
Kitchen Suppression Systems Basics
- 1. Restaurant hood fire suppression systems are the best solution for commercial kitchens because they respond automatically.

- 2. These systems come equipped with a manual pull station that can be activated by kitchen personnel.

- 3. They utilize a wet chemical agent that provides a blanket over the fire, extinguishing it and preventing reflash.

- 4. Nozzles and fusible links are placed directly above cooking equipment, extinguishing the fire quickly and efficiently.

- 5. Restaurant hood suppression systems are required by code to be installed in all commercial kitchens, as well as requiring semi-annual inspections.



November 10, 2022
Miscellaneous info & functions for using Bi-Directional Amplication (BDA) systems.
1. If emergency personnel are unable to communicate with each other, it puts both the emergency personnel and anyone in the building at risk.

2. BDA systems improve reception for radio networks on 700MHz, 800MHz, and 900 MHz bands, which is critical for emergency communication.

3. There are also BDA systems that boost cellular service to mitigate dead zones, but these aren’t typically used by emergency responders.

4. BDA systems are a critical component of maintaining safety in a building and keeping all personnel appraised of the situation as it unfolds.

5. To keep communication open, some buildings need to be outfitted with a Bi-Directional Amplification (BDA) system.

6. Current codes require a minimum signal strength of -95db for incoming and outgoing signals from a BDA system.

7. BDA systems used by public safety personnel work by boosting radio frequency signals.

8. There are several reasons why a building might need to have a BDA system installed, such as: many jurisdictions are making BDA systems a requirement for all new construction and, in some cases, are requiring retrofitting of older buildings that don’t meet the code requirements.



August 3, 2022
Why you should outsource your fire alarm design

When we think about fire alarms, we often think about the cost of getting a professional to design one for our home. But what about the cost of a professional? If you're interested in avoiding the cost of a professional, you should consider outsourcing the design of your fire alarm to a company that specializes in this type of design. By outsourcing the design, you'll be able to avoid the cost of a professional and get the design you want, while also saving money in the process.


What is outsourcing?

Outsourcing is a process of contracting out a specific task to a third party. It is a process of transferring the work of a person or a business to another entity, such as a company in another country. Outsourcing can be done in many different ways, such as by hiring an employee, hiring a company, or hiring an individual. A company that outsources tasks to another company or individual is referred to as an outsourcing or offshoring company.

Why should you outsource your fire alarm design?

A lot of people are scared to design their own fire alarm system because they are worried about the liability of doing so. As a result, they decide to outsource the design of the fire alarm system. There are a lot of benefits to outsourcing your fire alarm design. One of the main benefits is that it will save you a lot of time and money. When you outsource your fire alarm design, you can let someone else take care of the entire process. This will free up your time to focus on other aspects of your business. Another benefit of outsourcing your fire alarm design is that it will give you peace of mind. By outsourcing your fire alarm design, you will be able to rest easy knowing that the design is being done by professionals.

What are some of the benefits of outsourcing your fire alarm design?

There are several benefits of outsourcing your fire alarm design, such as cost, quality, and time. When you outsource your design, you are able to save a lot of money and the quality is generally higher. Some people think that it is a waste of time to outsource your design, but the truth is that it will take you a lot less time to do it. There are also a lot of people who are worried about the safety of the design. If you outsource your design, you can be sure that you are getting a quality design.

Conclusion.

As the owner of a business, you know that fire protection is a must. In today's day and age, fire protection is not just limited to a fire extinguisher. You also need to have a fire alarm system. But having a fire alarm system is not easy. There are many different types of fire alarm systems and each one has its own unique set of specifications. These specifications vary from one type of fire alarm to another. For example, there are fire alarm systems that are hardwired, however, there are also fire alarm systems that are battery-powered. There are also fire alarm systems that are designed to be used outdoors and indoor fire alarm systems. There are even fire alarm systems that have a siren and a speaker. So, as you can see, there are a lot of types of fire alarm systems. And even if you have the perfect fire alarm system for your business, it can still be difficult to design and install it. But fortunately, there are companies that can help you design and install your fire alarm system. These companies can often design and install fire alarm systems in a matter of days.


August 3, 2022
A Guide To Choosing The Right Fire Alarm System Designer

Information on fire alarms is often difficult to find and understand. There are many factors to consider, such as the type of system that you need and the fire codes that your system is subject to. This blog will provide you with useful information on how to choose the right fire alarm system based on your needs and location.


1. Fire alarm system basics

Fire alarm system basics are a must to understand in order to make the right decision when choosing a fire alarm system. There are a lot of things to consider when choosing a system, so it is best to find a professional who can help you with this process. You should trust only NICET certified professionals to design your system. Most AHJs will require either a level III or IV for fire alarm system design and installation. It is important to know what you are looking for in a system. You should look for a system that fits your needs, your budget, and your space. The most important thing you should do is to know your needs. A system should be designed and installed according to those needs. Once you know what you are looking for, it's then time to make a decision about what type of system to buy. There are many types of fire alarm systems available.

2. Types of fire alarm systems

There are three types of fire alarm systems that are available to the homeowner: the smoke detector, the heat detector, and the fire alarm. Which type is right for you is based on how you want to protect your home. Smoke detectors are designed to detect smoke and are usually connected to a central monitoring station. Heat detectors are designed to detect the presence of heat and can be connected to a central monitoring station. Fire alarm systems are designed to detect both smoke and heat and can be connected to a central monitoring station. If you are not sure which type of fire alarm system is best for you, you should consult a professional from the beginning.

3. Fire alarms and fire codes

There are two types of fire alarm systems: the manual and the automatic systems. The manual system is the old style fire alarm system that has a pull station and a manual control panel. The automatic system is the new style fire alarm system that has a computerized system that is activated by smoke. The automatic system is a much safer system because it can detect the presence of smoke, heat, and other objects and stop the system from releasing the fire alarm. The manual system is not as reliable because it relies on the pull station to activate the system. The manual system is also more expensive because it must be installed by a professional. The automatic system is much more reliable and is less expensive because it is installed by a professional. There are two types of automatic fire alarm systems: the combination and the monitored system. The combination system is activated by smoke and is not monitored by an alarm company. The monitored system is activated by smoke and is monitored by an alarm company.

4. Conclusion.

Fire alarms are a must in most homes. They are a vital safety device that helps protect the people inside the home from fire. When it comes to choosing the right alarm system, there are many things to consider before you make your purchase. It is important to evaluate the different fire alarm system designers and choose wisely only those with NICET industry standard certification. This will help you to make an informed decision about which company to work with. There are a few things that are important to consider when choosing the right company to work with. These include the company's customer service and the design of the fire alarm system. It is also important to consider if the company is insured, like Fire Pro, and the cost of the fire alarm system. When it comes to choosing a company to work with, it is important to consider the company's reputation and the work they have done in the past. This was a guide to choosing the right fire alarm system designers.


August 3, 2022

How to Design a Fire Alarm System

Fire alarms in your home are a great way to ensure you and your family are protected in case of fire. Unfortunately, not all fire alarms are created equal. They often don't work as intended and it's hard to tell if they're not properly installed. With that said, here is a guide on how to design a fire alarm system that works.


1. What is a fire alarm system?

A fire alarm system is a system that helps to detect and alert people of a fire in a building. They are usually activated by sprinklers, heat sensors, and smoke detectors. A fire alarm system is designed to detect and alert people in the event of a fire. They are usually activated by sprinklers, heat sensors, and smoke detectors. A fire alarm system is designed to detect and alert people in the event of a fire. They are usually activated by sprinklers, heat sensors, and smoke detectors. A fire alarm system is designed to detect and alert people in the event of a fire. They are usually activated by sprinklers, heat sensors, and smoke detectors. A fire alarm system is designed to detect and alert people in the event of a fire. They are usually activated by sprinklers, heat sensors, and smoke detectors. A fire alarm system is designed to detect and alert people in the event of a fire. They are usually activated by sprinklers, heat sensors, and smoke detectors.

2. What are the components of a fire alarm system?

Fire alarm systems are designed to detect and alert people of the presence of smoke, heat, or other dangerous conditions. They are made up of a variety of components that work together to detect, sound the alarm, and send a signal to the control panel. These components are: - The smoke detector is a device that detects the presence of smoke, heat, or other dangerous conditions. - The heat detector is a device that detects the presence of high temperatures or other dangerous conditions. - The sprinkler is a device that releases water or other liquid to extinguish a fire or cool the affected area. - The control panel is the central hub that controls all the components of the fire alarm system. - The alarm is the sound that alerts people of the presence of smoke, heat, or other dangerous conditions. - The signal is the signal that alerts people of the presence of smoke, heat, or other dangerous conditions. - The panel is the device that alerts people of the presence of smoke, heat, or other dangerous conditions. - The system is the device that alerts people of the presence of smoke, heat, or other dangerous conditions.

3. How do fire alarms work?

Fire alarms work by constantly monitoring the environment for smoke, heat, and fire. When the sensors detect a change in the environment, the alarm is activated. The sensors then send a signal to a control panel, where the signal is received by a speaker. This speaker then sounds a warning to the occupants of the home. A fire alarm system can also be a subpanel of a larger system.

4. How to design a fire alarm system.

There are many different types of fire alarm systems, but they all have one thing in common: they alert you when fire is detected so that you have time to escape. The most common types of fire alarm systems are stand-alone, hardwired, and wireless. The stand-alone system is the most common because it is easy to install, but it is limited in the types of alerts it can send. The hardwired system is also easy to install, but it is a more expensive system. The wireless system is the most expensive, but it is also the most versatile. It can send alerts to your phone, give you notifications on your computer, or even send alerts to your smart home appliances. You should consider outsourcing your fire alarm system design to NICET certified professionals like Fire Pro, www.fireprodesignco.com Fire Pro designs fire alarm systems as well as other types like pre-action, VESDA and CCTV, etc.


August 3, 2022

Only trust NICET certified professionals when you outsource fire alarm design

Do you outsource fire alarm design? If so, you should only do so to a NICET certified professional. If you don’t know what these professionals are, they are a group of experts who are created by the National Institute of Certification in Engineering Technologies. NICET has set high standards which only professionals can attain before they are allowed to call themselves a NICET certified professional. They are a group of people who you can trust. They have tested themselves and have proven to be professionals who have a history of dealing with complex projects. This is why you should only trust them with your fire alarm design.


What is a NICET certified professional?

A NICET certified professional is an individual who has completed a certification program in fire alarm design. They are trained to design and install fire alarm systems that protect people from harm. This certification is required by many fire alarm jurisdictions. When you outsource fire alarm design, it is important to only trust NICET certified professionals.

Why you should only trust them with your fire alarm design

If you want to get a fire alarm system designed, you should only trust a NICET certified professional. They are the best people to trust with your fire alarm design. They have the necessary qualifications and are trained to handle any type of fire alarm system design. Moreover, they are able to provide you with the best design service possible.

How to find a NICET certified professional

When it comes to outsourcing fire alarm system design, you want to make sure that the professionals you hire are certified. There are many different fire alarm designers, but if you want the best quality of work, you should only hire professionals who are NICET certified. The National Institute for Certification in Engineering Technologies (NICET) is the international standard for certifying fire alarm designers and installation professionals. 

Conclusion.

Only trust NICET certified professionals when you outsource fire alarm design. NICET is the National Institute for Certification in Engineering Technologies, which has set the highest standards for fire alarm design.


August 3, 2022

You can outsource your fire alarm design if you had to let go your employee because of the pandemic

With the recent pandemic, you may have been forced to let go of your employee. This is not the only reason you may have to use outsourcing as a way to handle your fire alarm design needs. If you are not sure you will be able to find a designer, or if you simply want to save some time and money, outsourcing is a way to get your fire alarm design done.


How to find a fire alarm design company

If you had to let go your employee because of the pandemic, you can outsource your fire alarm design. It is important to find a company that has a good reputation and a good track record like Fire Pro. You can find reputable companies by looking at their website and getting proof of their NICET certification, work samples and reviews.

What questions to ask a fire alarm design company

If you have to let go your employee because of the pandemic, you can outsource your fire alarm design. You should ask a few questions before deciding to hire a fire alarm design company. You should ask the following questions before hiring a design company: - What are the company's credentials? - What are the company's fees? - What is the company's experience with designing fire alarms? - What is the company's experience with designing for high-rise buildings? - What is the company's experience with designing for hotels? - What is the company's experience with designing for office buildings? - What is the company's experience with designing for hospital buildings? - What is the company's experience with designing for universities?

How to choose a design company

When you are looking for a company to design your fire alarm system, it is important to find one that has experience designing fire alarm systems. This will ensure that the design is accurate and safe. It is also best to find a company that has the ability to design other systems as well like pre-action and VESDA. It is also important to find a company that has the proper insurance to cover your business in the event that something goes wrong with the fire alarm system.

Conclusion.

The best decision you can make could be to outsource your fire alarm design. You can outsource the design to a company that specializes in designing fire alarms. You can find these companies on the web. Just be sure that the company you hire has a lot of experience in designing fire alarms, like Fire Pro.


August 3, 2022

A Beginners Guide to Fire Alarm Submittals

Fire Alarms are pretty much mandatory in any commercial building, but they are also a safety concern. This is why it is important to understand the laws and regulations that affect your fire alarm system. The key to success is understanding how to submit your fire alarm submittals correctly. In this post, we will teach you the basics of fire alarm submittals and help you understand the importance of understanding the laws.


1. What is a fire alarm submittal?

A fire alarm submittal is a document that a building owner must submit to the fire department in order to receive a fire alarm permit. It is the building owner's responsibility to submit the submittal as soon as possible, prior to the start of the installation. The submittal will include information on the type of system being installed and any other details that the fire department requires.

2. Why are fire alarm submittals important?

Fire alarm submittals are required for all projects. They help to make sure that the fire alarm system your business has is operational and up to date. It also helps to make sure that your business is compliant with fire regulations. There are a few different types of fire alarm submittals that your business must submit. There is a fire alarm submittal that is filed with the local fire department, and there is a fire alarm submittal that is filed with the state fire marshal, it just depends on the location of the project. It is also important to note that there are some businesses that are exempt from these submittals. If you are exempt, you may need to have a letter on file that states you are exempt. You should also note that your fire alarm system must be inspected by a fire marshal every three years.

3. What types of fire alarm submittals are there?

There are many types of fire alarm submittals that you can submit. The most common type is a standard fire alarm submittal. There are also a few other types of submittals that you may need to submit. These include a sprinkler system submittal, a standpipe system submittal, and a standpipe system submittal with a specific system. The types of fire alarm submittals that you need to submit depend on the type of system you have as well as the type of building you have. A fire alarm design system drawing, fire alarm datasheets and an AHJ application are typically what is included in the submittals package. If you outsource your fire alarm design to Fire Pro, we can provide the data sheets for your submittals along with your design drawing which you can submit to the AHJ for approval.

4. How to submit your fire alarm submittals.

The best way to submit your fire alarm submittals is to first contact your local fire department. The fire department can help you submit your submittal and make sure that it is submitted correctly. After you contact your fire department, you will need to mail your submittal to the correct address. You can find the address on the fire department website. After you mail your submittal, you will need to wait for the fire department to come and inspect your submittal. Once they come, they will check to make sure everything is in order and the fire department will sign off on your submittal. It is important to make sure that your submittal is submitted correctly and that you are following the fire department's guidelines. Depending on the AHJ, they will also allow in person drop off and pick up of the submittals. More and more offer electronic submittals over their website or through a third party plan review service like www.planreviewonline.com


August 30, 2022

Outsourcing Fire Alarm Designers Who Charge for Datasheets

Not all outsource fire alarm system designers are created equal. Some will charge for datasheets, we don't. This can cause a lot of frustration for people who are looking for a fire alarm system designer. If you're looking for a reliable and professional system designer, consider outsourcing the work to a company who doesn't take advantage of you with extra unnecessary charges. Outsourcing fire alarm designers who charge for datasheets can cost you extra money and that dips into your estimate for design.



1. What is an outsource fire alarm system designer?

An outsource fire alarm system designer is someone who creates a fire alarm system design for a customer based on their preferences and specifications. This type of designer typically charges a fee for that particular design or could charge a monthly fee for the ongoing service. This type of designer is perfect if you don’t employ a designer in your office.

2. Why choose an outsource fire alarm system designer?

When designing a fire alarm system, you need to be sure to choose a reputable company to outsource to. To ensure you have a reputable company, there are three key things you should look for. First, you should look for a company that NICET certified. Second, you should look for a company that has a good track record and has been in business for a while. Finally, you should look for a company that can also provide datasheets along with their design.

3. Outsource fire alarm system designers who charge for datasheets

There are many companies that offer outsourcing fire alarm design services, but not all of them charge for datasheets. You should ask your potential outsourcing fire alarm designer why they charge for datasheets. You should also ask them how they charge for other services, and if there are any hidden charges they aren't mentioning upfront.

4. Conclusion.

Outsourcing is a popular option for many companies. It provides many benefits to companies, including savings on labor costs and time. However, it is important to use a reputable company that charges fair prices and provides great services. With this in mind, I recommend using a company that doesn't charges for their datasheets. There are many companies that charge for their datasheets, which is questionable since it only takes about 5 minutes to put them together. Be careful not to get scammed.